07156-00912 WR Floating Oil Seal Cylinder Piston Hydraulic Guide Ring
Specification
|
Product name
|
07156-00912 WR Floating Oil Seal Cylinder Piston Hydraulic Guide Ring |
|
Material
|
WEAVE COTON+PHENOL Resin
|
|
Style
|
Wearing,Slide ring
|
|
Type
|
Standard type/L type/XY type
|
|
Used part
|
Hydraulic Cylinder
|
|
Application
|
Excavator,Breaker,Bulldozer,Lift,Etc
|
|
Using
|
Piston direction guide
|
|
Warranty
|
18 months
|
|
MOQ
|
≥2 sets
|
|
Stock
|
Yes
|
|
|
Inner packing in shrink wrapped plastic bags and boxes;
outer packing in cartons and wooden pallets;
Also can make customers'packing.
|
Floating Oil Seal describe
Floating seal consist of two same metal steel rings and two same rubber o rings.
Metal steel rings material are Alloy casting Iron (15Cr1Mo)
The working principle is a pair of metal rings supported by a pair of rubber rings to form a closed space with the cavity.
When running, the after-grinding seal surface of the two metal rings act in close coordination and sliding relatively.
Features
Floating oil seal is a kind of metal mechanical seals, initially used to replace the bulldozer chassis of rubber oil seal, the original use of rubber oil seal because of the sediment corrosion, wear and soaking, the damaged very fast, and the floating oil seal is designed for such bad working conditions and a compact structure of the mechanical seal device, to prevent oil leakage and prevent the external pollution such as soil body into device, floating oil seal structure is simple, wear-resisting, resistance to vibration, pollution, channeling, impact and oscillation, work stable and reliable service life is long, maintance now has been widely used in all kinds of engineering machinery and mining machinery.This kind of oil seal is also called double cone oil seal, permanent seal or metal end seal.
If not required, do not open the seal, otherwise dust will stick to the seal or scratch the seal.
Store in a cool place, not in the sun.Ultraviolet light and moisture accelerate the wear and dimensional changes of rubber and plastics
Be careful with packaging. Do not paste or stack without packaging and keep it in its original state.Keep the nylon sealed package tight to prevent dimensional changes caused by moisture
Do not put the seal near the heat source, such as boiler and stove.Otherwise, heat will accelerate the aging of the seal
Do not place the connector near the engine or other places where ozone occurs
Do not hang the rope with a needle, thread or seal, otherwise the seal will be deformed and the lip will be damaged
Sometimes, there will be color change or white powder (frosting) on the sealing surface, which will not affect the sealing performance
Application
| KATO: |
HD250SE-2 HD250-5/7 HD307 HD400SE-2 HD400SEN2 HD400-5/7 HD450-5/7 HD510 HD512 HD550-5/7 HD700-2/5 HD700-7 HD770-1 HD770-2 HD800-5 HD800-7 HD820-1/2/3 HD900-5/7 HD1023 HD1220SE-2 HD1250-5/7 HD1430 HD1880-7 HD900-7 HD880 |
| VOLVO: |
EC210B EC240B EC290B EC320C EC360B EC460B |
| DAEWOO: |
DH S55 DH55-5 DH60-7 DH80-7 DH130-5 DH150-7 DH220-2 DH220-3 DH220-5 DH225-7 DH258-7 DH280-3 DH320 DH320-2/3 DH330-3 DH330CL-5 DH450 DH130-7 DH280 |
| HYUNDAI: |
R60-7 R130-5 R130-7 R200 R200-5 R210-3 R210-5 R210-7 R215-7 R220-5 R220-7 R225-7 R260-5 R280-1-N/O R290-1 R290-3 R290-7 R300-5 R300-7 R305-7 R320 R320-3 R320-7 R335LC-7 R420 R450-3 R450-5 |
Your message must be between 20-3,000 characters!
