Product Details:
|
Part NO: | ZAX200-3 | Hardness: | 90-95 Shore A |
---|---|---|---|
Feature: | Sealing Performance | Material: | PU+TPFE+FKM+NBR |
Working Tempereture: | -40--120℃(according To The Material) | Type: | Hydraulic Excavator Seal Kit |
Application: | Machinery,automobile,thermo, Electrical | Keyword: | Seal Kits |
Highlight: | 4654422 Seal Kit |
4654422 Excavator Hydraulic Arm Boom Bucket Cylinder Seal Kit For Excavator ZAX200-3
Specification
Product name
|
4654422 Excavator Hydraulic Arm Boom Bucket Cylinder Seal Kit For Excavator ZAX200-3
|
Application
|
machinery,automobile,thermo, electrical
|
Condition
|
Brand new, ready to be installed
|
Material
|
PU+TPFE+FKM+NBR
|
Hardness
|
90-95 Shore A
|
Working Tempereture
|
-40--120℃(according to the material)
|
Type
|
Hydraulic Excavator seal kit
|
Keyword
|
seal kits
|
Payment methods
|
T/T, L/C, Money Gram, Western Union, Paypal
|
Supply Ability
|
500 Pcs / Week
|
Hydraulic cylinder seal kit Describe
The hydraulic cylinder Oil Seals are used in the machines for oil proof. From the structure of the product, it can be classified into two types: single lip Skeleton oil seals and double lips Skeleton oil seals. They are widely used in the rod of machines' engines, usually are used to prevent the oil leaking and the dirt outside.
Do not open the seal package if unnecessary, otherwise the dust will stick to the seal or scratch it.
Store in cool place, not on sunlight place. UV and moisture will accelerate the deterioration of rubber and plastics and dimensional changes
Carefully pack, store unpackaged product, do not glue or put into impurities, keep the original state. Keep the Nylon seal package close to prevent moisture cause dimensional changes
Do not put seals near heat sources, such as boilers, stoves. Otherwise heat will accelerate the aging of seals
Do not put seals near the motor and other place where produces ozone
Do not use a needle, wire, rope hang seals, otherwise, would cause the seal deformation, damage the lip
Sometimes, there are color change or white powder on the seal surface (frost phenomenon), this will not affect the performance of the seal
Features
Avoid using old seals. When using a new sealing ring, carefully check its surface quality to ensure that there are no defects such as small holes, protrusions, cracks and grooves, and have sufficient elasticity before using it.
When installing, you should strictly clean all parts of the opened hydraulic system. It is best to use special tools to prevent fingers from being scratched by sharp metal edges.
When replacing the sealing ring, check the groove of the sealing ring strictly, remove the dirt, and polish the bottom of the groove.
In order to prevent damage and cause oil leakage, it must be operated in accordance with the regulations. At the same time, the machine cannot be overloaded for a long time or run in a relatively harsh environment.
Application
HITACHI: | UH04-5 UH07-7O/N UH09 UH09-7 EX60-1/2/3/5/6 EX90-1 EX100-1 EX100-2 EX100-3 EX100-5 EX120-1 EX120-2 EX120-3 EX120-5 EX120-6 EX160-1 EX200-1 EX200-2 EX200-3 EX200-5 EX200-6 EX210-5 EX220-1 EX220-3 EX220-5 EX220-6 EX270 EX300-1 EX300-3 EX300-5 EX300-6 EX330-3 EX400-1/2/3/5/6 EX450-1/2/3/5/6 ZAX55 ZAX60 ZAX70 ZAX100-1 ZAX100-2 ZAX135 ZAX200-1/6 ZAX210 ZAX225 ZAX230 ZAX230-5 ZAX240 ZAX250-8 ZAX270 ZAX330 ZAX350-3 ZAX360 ZAX360-3-N ZAX360-O ZAX450 | |||||||
KOBELCO: | SK07-N2 SK55 SK60-1 SK60-2 SK60-3 SK60-5 SK60-6 SK100-1 SK100-2 SK100-3 SK100-5 SK100-6 SK120-1 SK120-2 SK120-3 SK120-5 SK120-6 SK135-7 SK200-1 SK200-2 SK200-3 SK200-5 SK200-6 SK200-6E SK200-7 SK200-8 SK210-6E SK210-7 SK210-8 SK230-6 SK230-6E SK220-3 SK220-6 SK235 SK250-8 SK300-3 SK300-6 SK310-3 SK320-3 SK320-6E SK320-6 SK330-8 SK350 SK350-6 SK350-8 SK400-3 SK09 SK450 | |||||||
SUMITOMO: | SH60 SH75 SH100 SH120-1/2/3/5 SH160 SH200-1/A3 SH210 SH220 SH220A3 SH260 SH300-2 SH350 LS2650FJ-2 LS2800CJ/DJ/EJ/FJ-2 LS2800FJ2 LS2800F2 LS3400EA LS3400FJ LS4300 | |||||||
KATO: | HD250SE-2 HD250-5/7 HD307 HD400SE-2 HD400SEN2 HD400-5/7 HD450-5/7 HD510 HD512 HD550-5/7 HD700-2/5 HD700-7 HD770-1 HD770-2 HD800-5 HD800-7 HD820-1/2/3 HD900-5/7 HD1023 HD1220SE-2 HD1250-5/7 HD1430 HD1880-7 HD900-7 HD880 |
Contact Person: Miss. Chunjingcheng
Tel: +8613911115555
Fax: 86-0755-00000000