K5V140DT Power Steering Pump Seal Kit , Hydraulic Piston Seal Kit 8-1000mm Diameter

4451039 K5V140DT power steering pump seal kit , 8 - 1000mm hydraulic piston seal kit

Specification

Hydraulic Pump Seal Kit Describe

Hydraulic cylinder seal kits are used to seal the gap between different parts of the hydraulic cylinder. Within the system, there are 2 main types of hydraulic seals India:

Dynamic seals: Designed to seal various parts in relative motion. They can be utilized in high pressure and even when rod and hydraulic cylinder seals are in reciprocal motion between the head and the connecting rod.

Static seals: Our static seal kit seal parts that are not in relative motion. These are used in various locations as per the construction and look of the hydraulic cylinder. The connection rod and piston is the primary area where these seals are used.

Cylinder repair or seal kits are also referred to as arm, loaders, backhoe, dozers, dumpers, cranes, forklifts, bucket, slew, dipper, boom, main pump, track adjuster, back lift, loader, steering, blade, break, swing, dump, back lift and so on.

Features

Standard seal: Unless otherwise specified on your unit, you most likely need to purchase a standard seal kit. Standard seals are usually made of nitrile and are intended to be used in air and mineral-based hydraulic oils.
Loaded lip seal: Loaded lip seal configurations are ideal for low-pressure applications in a variety of industries including construction, automation and manufacturing. While loaded lip seal designs are generally extremely durable, they occasionally need to be replaced.
Fluorocarbon seals: Combining high-temperature resistance with superior chemical resistance, Fluorocarbon seals are ideal for high-pressure applications. Because these seals are often utilized regularly, they tend to break down over time. Yates Cylinders sells seals in a variety of sizes and price points.
Cast iron piston rings: These rings are used in a variety of high-speed and high-temperature applications including automation and construction. Cast iron piston rings are highly durable and are often used for heave shock applications because of their strength. Keep in mind these rings do not create the complete seal that urethane or rubber seals do. However, they can withstand much higher shocks and are wider and deeper than the standard ring configuration.
Low-friction seals: Operators of systems powered by fluid frequently need friction-optimized seals for hydraulic cylinders. Having too much friction wastes energy and can cause the seal to fail prematurely. However, having too little friction can cause leaks. Our low-friction seals are specially calibrated to create the right amount of friction for a variety of applications.

Application

When installing, you should strictly clean all parts of the opened hydraulic system. It is best to use special tools to prevent fingers from being scratched by sharp metal edges.

When replacing the sealing ring, check the groove of the sealing ring strictly, remove the dirt, and polish the bottom of the groove.

In order to prevent damage and cause oil leakage, it must be operated in accordance with the regulations. At the same time, the machine cannot be overloaded for a long time or run in a relatively harsh environment.

Precautions

1. Clean the installation location;

2. Remove the burrs during the installation movement of the seal;

3. Apply lubricant on the seals;

4. Protect the sealing surface from damage;

5. Recheck to confirm that the size of the seal is correct;

6. Use corresponding tools to install the seals that need to be deformed and installed.

Scope of use

Hardware and plastics, water supply and drainage, HVAC, fire fighting, pharmaceuticals, ships, and other pipeline systems, automobiles, motorcycles, various machinery, household appliances, electronics, toys, sports equipment, pneumatic components and sanitary ware, etc.